Duane Roberts 
Most people believe that electric shower are less powerful than standard ones. However, if you know how to use them properly, you can actually get a stronger water flow from an electric shower. In this blog post, we’ll give you some tips on how to get the best performance from your electric shower.
Here are some tips to get the best performance out of your electric shower:
1. Place the shower head at the correct height. The ideal height for a shower head is between five and six feet. If the shower head is too high, the water pressure will be too low. If it’s too low, the water will splash all over the place.
2. Position the shower head so that it’s pointing down at an angle. This will help to increase the water pressure.
3. Make sure that there’s no build-up of limescale on the shower head. Limescale can reduce the water pressure and cause the water to spray in all directions. You can remove limescale by soaking the shower head in vinegar overnight.
4. Don’t use all of the hot water at once. Electric shower heat up water as it’s passing through, so if you use all of the hot water in your house at once, it will take longer for the electricity to heat up enough water for your shower. Instead, try turning on the cold water first and then gradually adding more hot water until you reach your desired temperature.
5. Take shorter showers. The longer you stay in the shower, the more hot water you’ll use up and the longer it will take for your electric shower to heat up more hot water. So try to keep your showers under five minutes if possible!
Conclusion:
Electric shower can be just as good as standard ones if you know how to use them properly. By following these tips, you can get a stronger water flow and a better performance from your electric shower. Thanks for reading!
1. Make sure your shower head is the correct size for your system and that it is properly attached to the pipe. This will ensure a steady water flow without any pressure drops.
2. Regularly clean and descale your shower head and pipes to keep them in top condition. Mineral deposits can build up over time, reducing water flow and pressure.
3. Buy a shower head with as many holes as possible for a stronger water flow, or buy an adjustable one that you can adjust the flow of water on when needed.
4. If your electric shower is slow to heat up, try installing an inline filter in the pipe to reduce limescale and other impurities.
5. Make sure to turn the temperature setting down to its lowest before turning it on, and then gradually increase the temperature until you get a comfortable shower experience.
6. Ensure that your electric shower is regularly serviced by a qualified engineer as this will help keep it running smoothly and reduce the risk of problems occurring.
7. If your electric shower is not providing enough hot water, consider investing in a high-pressure system that can more efficiently deliver the correct temperature of water.
8. When replacing an old electric shower, make sure you have one that is compatible with your current plumbing setup and has all the necessary safety features installed.
By following these tips, you can be sure to get the best performance out of your electric shower and enjoy a more luxurious shower experience.
